自动搅拌一体车维修 油耗降低的方法
How much is the maintenance cost of automatic mixer truck and how to reduce fuel consumption
随着各企业减排观念的日益加深,如何降低自动搅拌一体车的油耗也成为很多企业比较关注的问题,那么小编今天就来给大家普及一下降低自动上料搅拌车油耗的几个小方法。
With the deepening of the concept of energy conservation and emission reduction of enterprises, how to reduce the fuel consumption of the automatic mixer truck has become a problem of concern to many enterprises. Today, we will popularize several small methods to reduce the fuel consumption of the automatic mixing truck.
在行驶中或启动时发现自动搅拌一体车轮有异常响声,要及时检查轴承及刹车系统是否有故障。如果车轮运转不正常,就会影响车速,从而使油耗加大。离合器打滑会使动员机的转数降低。当您在急加速时发现动员机转速表增加很快,但车速增加却很慢,这时可以鉴定是离合器打滑了。
If abnormal sound is found in the wheel of automatic mixing unit during driving or starting, timely check whether the bearing and brake system are faulty. If the wheel does not run properly, it will affect the speed and increase the fuel consumption. Slip of the clutch will reduce the number of revolutions of the mobilization machine. When you accelerate rapidly, you find that the speedometer of the mobilization machine increases rapidly, but the speed increases slowly. At this time, it can be identified that the clutch is slipping.
自动搅拌一体车火花塞使用的时间太长,也会出现油耗加大的现象。因为火花塞损坏会使焚烧的能量下降,使搅拌车提速减慢,导致柴油耗损明显增加。只要更换火花塞就好了。
If the spark plug is used for too long, the fuel consumption will increase. Because the damage of spark plug will reduce the energy of burning, slow down the speed of mixer, and increase the diesel consumption obviously. Just replace the spark plug.
当自动搅拌一体车的温控开关和节温器损坏时,会呈现油耗增加的现象。因为温控开关和节温器损坏会使水温低落,化油器不能正常工作,导致混凝土搅拌车雾化不良,油耗量明显增加。长时间行驶时,凡是会出现汽缸压力不符的现象,这时油耗也会明显增加。如果出现这种情况,那么就需要大修了。
When the temperature control switch and thermostat of the automatic mixer are damaged, the fuel consumption will increase. Because the temperature control switch and thermostat damage will make the water temperature drop, the carburetor can not work normally, resulting in poor atomization of concrete mixer truck, and the fuel consumption is significantly increased. When driving for a long time, the cylinder pressure does not match, and the fuel consumption will increase obviously. If this happens, it will need to be overhauled.