搅拌车在上料时有什么要求,如果在进料期间出现堵料的情况要怎么处理,提前如何备料才会相对来说好些,能尽量避免具体来看下吧:
What are the requirements of the mixer when loading, how to deal with the material blocking during the feeding, and how to prepare the material in advance are relatively better. You can try to avoid it. Let's look at the details
有时候我们会使用手动料枪吸料,为了方便操作直接将料枪插入物料桶或者吨袋中,料枪吸料口被严实的物料压缩,强大的负压将满满的物料拉走,这对上料机伤害非常大,且极易堵塞管道。
Sometimes we use the manual material gun to suck material. In order to facilitate operation, we directly insert the material gun into the material barrel or ton bag. The suction port of the material gun is compressed by the solid material, and the strong negative pressure pulls the full material away. This is very harmful to the feeder, and it is very easy to block the pipe.
正确的方式是物料在吸料口和空气形成一定的气物混合比,在气流的推动下均匀流入上料机。这个时候我们需要将料枪设计带有补气功能。如果物料积压时间过长可能很硬,这个时候需要在料枪上装一个振荡器,敲碎结块的物料。
The correct way is to form a certain air-material mixture ratio between the material at the suction port and the air, and flow into the feeder evenly under the push of the air flow. At this time, we need to design the material gun with air supply function. If the material overstocking time is too long, it may be very hard. At this time, an oscillator needs to be installed on the material gun to break the caked material.
了解到了出现上料进出料不顺,堵料的现象,要怎样处理,在日后使用中多加注意此现象,本厂主要生产各种搅拌机,有需要什么产品欢迎前来选购。
We know that the phenomenon of feeding and discharging is not smooth and the material is blocked. How to deal with it? We should pay more attention to this phenomenon in the future use. Our factory mainly produces all kinds of mixers. If you need any products, you are welcome to buy them.