混凝土自动上料搅拌车的使用维护保养要点_ 行业动态_新闻资讯_自动搅拌一体车_自动搅拌一体机

站内搜索

新闻资讯

公司新闻行业动态

热点

自动上料平口搅拌机多种方量可供选择

2022-12-23

混凝土自动上料搅拌车的功能有哪些？

2022-12-19

混凝土自动拌料车移动式可自行走户外施工

2022-12-16

自上料搅拌车企业这么多，买车的时候应该看哪方面？

2022-12-12

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

混凝土自动上料搅拌车的使用维护保养要点

所属分类：行业动态发布时间：2022-10-10 来源：http://www.shanqijituan.cn/ 浏览量：0

随着我国建设的快速发展，人们对混凝土自动上料搅拌车的需求也不断变大，但是，混凝土自动上料搅拌车是一种特殊车辆，并不是所以的人都能够对其完全掌握。但是，要想提高混凝土自动上料搅拌车的寿命和工作效率，还是要做好其维护保养工作。下面，小编就给大家介绍下混凝土自动上料搅拌车的使用维护保养要点。

With the rapid development of China's construction, people's demand for automatic concrete loading mixer is also growing. However, automatic concrete loading mixer is a special vehicle, and not all people can fully master it. However, if you want to improve the service life and working efficiency of the automatic concrete feeding mixer, you should do a good job in its maintenance. Now, Xiaobian will introduce the key points of the use and maintenance of the automatic concrete feeding mixer.

一、液压驱动系统维护

1、 Hydraulic drive system maintenance

液压系统可以说是混凝土自动上料搅拌车的核心系统。为保证混凝土自动上料搅拌车能正常工作，搅拌罐能运转正常，须在每次车辆发动前检查油路散热器和减速机的液压油位，保证油位指示在视窗范围内。同时要保证其清洁性，以免尘粒和水分等污染系统液压油，造成系统不能正常工作或损坏。

The hydraulic system can be said to be the core system of the automatic concrete loading mixer. In order to ensure that the automatic concrete feeding mixer can work normally and the mixing tank can operate normally, the hydraulic oil level of the oil radiator and reducer must be checked before the vehicle is started each time to ensure that the oil level indication is within the scope of the window. At the same time, ensure its cleanliness to avoid contamination of the hydraulic oil of the system by dust particles and moisture, which may cause the system to fail to work normally or be damaged.

二、供水系统维护

2、 Maintenance of water supply system

气压供水系统加水量一般在水箱的四分之三处为宜；车辆在行驶时水路系统中各个阀门均应处于关闭状态，以免影响车辆的制动性能，或烧结摩擦片，从而影响车辆的制动性能。禁止随意焊动和改动水箱，避免重物撞击；经常检查阀体是否堵塞或是否有工作异常；在有结冰可能的环境中使用时，供水系统须排空存水，防止管路冻裂；经常检查系统的密封性，拆卸修理后，关键部位要涂螺纹密封胶。

The water volume of the pneumatic water supply system is generally three quarters of the water tank; All valves in the waterway system shall be closed when the vehicle is running, so as not to affect the braking performance of the vehicle, or sinter friction plates, thereby affecting the braking performance of the vehicle. It is prohibited to weld and change the water tank at will to avoid heavy objects; Check the valve body frequently for blockage or abnormal operation; When the water supply system is used in an environment with the possibility of icing, the water storage must be drained to prevent the pipeline from freezing; Check the tightness of the system frequently. After disassembly and repair, apply thread sealant to key parts.

三、搅拌筒维护

3、 Mixing drum maintenance

初次使用要及时检查罐体及别的部位螺栓是否有松动，每天行车前要检查托轮与滚道的润滑，每个月打开一次托轮护罩，清理内部的油污并添加润滑油脂。

For initial use, timely check whether the bolts on the tank body and other parts are loose. Before driving every day, check the lubrication of the supporting wheel and raceway. Open the supporting wheel shield once a month, clean the internal oil stain and add lubricating grease.

以上就是为大家介绍的有关自动搅拌一体车的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.shanqijituan.cn/

The above is a detailed introduction to the automatic mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.shanqijituan.cn/

上一页：自动上料水泥搅拌车漏油怎么办？下一页：混凝土自动上料搅拌车维护保养秘诀

热门产品 / HOT PRODUCT