多功能搅拌车忽然不工作了是什么原因_公司新闻_新闻资讯_自动搅拌一体车_自动搅拌一体机

站内搜索

新闻资讯

公司新闻行业动态

热点

自动上料平口搅拌机多种方量可供选择

2022-12-23

混凝土自动上料搅拌车的功能有哪些？

2022-12-19

混凝土自动拌料车移动式可自行走户外施工

2022-12-16

自上料搅拌车企业这么多，买车的时候应该看哪方面？

2022-12-12

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

多功能搅拌车忽然不工作了是什么原因

所属分类：公司新闻发布时间：2020-11-03 来源：http://www.shanqijituan.cn/ 浏览量：0

多功能搅拌车忽然不工作了是什么原因

What is the reason why the multi-functional mixer suddenly does not work

确定油路畅通，柴油机供给系统没有空气后，可拆开油泵盖板，板动操纵手柄，拨动油泵拉杆，看拉杆是否灵活和柱塞弹簧是否断裂。在自动上料搅拌车拉杆灵活和柱塞弹簧没断的情况下，可启动柴油机中速运转10分钟，还有断火现象时，可用一只铜榔头轻轻敲击输油泵大螺帽，一边敲一边听柴油机声音，如果声音不正常，说明自动上料搅拌车输油泵活塞和推杆发卡，进行修理或更换。

After confirming that the oil circuit is smooth and there is no air in the diesel engine supply system, the cover plate of the oil pump can be disassembled, the control handle can be moved, and the pull rod of the oil pump can be pulled to see whether the pull rod is flexible and whether the plunger spring is broken. Under the condition that the pull rod of the automatic feeding mixer truck is flexible and the plunger spring is not broken, the diesel engine can be started to run at medium speed for 10 minutes. In case of fire interruption, a copper hammer can be used to gently tap the big nut of the oil delivery pump, and listen to the sound of the diesel engine. If the sound is abnormal, the piston and push rod of the oil pump of the automatic feeding mixer truck are jammed and repaired or replaced.

多功能搅拌车

油嘴不雾化，油泵柱塞弹簧和弹簧座断裂，卡死不工作，或是柴油内有水。拆下油嘴总成检查开启压力和雾化，如果油嘴总成正常，可让用户用干净柴油装入壶中用油路旁接法进行试验。打开自动上料搅拌车油箱开关，拆下输油泵进油管，看油流情况，如果油流很快，说明正常，如果油流时断时续查油路。

The oil nozzle is not atomized, the plunger spring and spring seat of the oil pump are broken, stuck and do not work, or there is water in the diesel oil. Remove the nozzle assembly to check the opening pressure and atomization. If the nozzle assembly is normal, the user can fill the pot with clean diesel oil and conduct the test with the oil way side connection method. Turn on the oil tank switch of the automatic feeding mixer, remove the oil inlet pipe of the oil delivery pump and check the oil flow. If the oil flow is fast, it indicates that it is normal. If the oil flow is intermittent, continue to check the oil circuit.

多功能搅拌车的刚刚停止作业时，发动机的冷却液，所有零件中的油，排气管和消声器都处在高温下，如果拆缷盖子或排油或更换滤油器等都会造成烫伤或其它伤害，应等待温度降下来后再进行保养和检查。

The engine coolant, oil in all parts, exhaust pipe and muffler are in high temperature when the automatic feeding mixer just stops working. If the cover is removed or the oil is drained or the oil filter is replaced, scald or other injuries will be caused. Maintenance and inspection should be carried out after the temperature drops.

多功能搅拌车，大家有需要找多功能搅拌车的话也可以关注公司网站：http://www.shanqijituan.cn

If you need to find a multi-functional mixer, you can also pay attention to the company's website: http://www.shanqijituan.cn

上一页：油泥对自动搅拌一体车的影响都有哪些？下一页：自动搅拌一体车是如何进行修复土壤残渣？

热门产品 / HOT PRODUCT