1、将搅拌车电器用塑料薄膜遮罩,然后用半湿性毛巾压盖于薄膜上侧,以防高压水冲进分电器,致使搅拌车难以启动;
1. Firstly, the mixer was covered with plastic film, and then covered with semi wet towel to prevent high pressure water from rushing into the distributor, which made the mixer difficult to start;
2、运用高压水枪由搅拌车发起机侧面按从上到下的次第将引擎室内侧及搅拌车发起机外表的附着类污物冲净;
2. The high-pressure water gun is used to clean the attached dirt inside the engine room and on the surface of the mixer initiator from top to bottom;
3、直接将搅拌车发起机外部清洗剂均匀喷洒于泅湿后的搅拌车发起机及引擎室周边;
3. The external cleaning agent of the mixer initiator is sprayed evenly on the mixer initiator and around the engine room after swimming;
4、闪凉3min后,用纤维毛刷清洗引擎室内所能触及到的一切部件;
4. After cooling for 3 minutes, use a fiber brush to clean all parts that can be touched in the engine room;
5、用高压水枪快速冲净刷洗掉的污物;
5. Use a high-pressure water gun to quickly clean the dirt washed by the brush;
6、然后再将搅拌车发起机外部清洗剂喷洒于引擎表面,操作步骤同上;循环往复,直将搅拌车发起机外表清洗干净;
6. Then spray the external cleaning agent of the mixer initiator on the engine surface, and the operation steps are the same as above; Cycle until the appearance of the mixer initiator is cleaned;
7、然后将冲洗干净的搅拌车发起机用半湿性毛巾擦干,并用吸尘吸水风干机将手不易触及到的吸干,然后风干;
7. Then dry the washed mixer starter with a semi wet towel, and use a vacuum suction air dryer to dry the hard to reach center, and then air dry;
8、用塑料橡胶维护剂对引擎室内侧的塑料橡胶部件中止上光,然后再将金属部件镀膜;
8. Stop polishing the plastic rubber parts inside the engine room with plastic rubber maintenance agent, and then coat the metal parts;
9、之后对保养了的搅拌车发起机和引擎室内侧用干净的无纺抛光巾中止检验。
9. After the maintenance of the mixer initiator and engine room side with clean non-woven polishing towel inspection.
以上是关于自动搅拌一体机发动机外部保养的细节内容,由多功能搅拌车友情分享,想要了解更多内容欢迎咨询http://www.shanqijituan.cn网站。
The above is about the details of the external maintenance of the motor mixer, shared by the multi-function mixer. If you want to know more, please consult http://www.shanqijituan.cn Website.