自动上料水泥搅拌车不客气的说可以作为一款科技界的创新,上市之后受到客户的厚爱,使得大受欢迎,成为了各项工作建设不可或缺的设备,但是很多朋友购买了自动上料水泥搅拌车后却不知该如何使用,今天,我们就给大家介绍下自动上料水泥搅拌车工作注意事项,希望对您有所帮助。
The automatic feeding cement mixer is said to be an innovation in the scientific and technological field. After its listing, it has been loved by customers, making it very popular and an indispensable equipment for various work construction. However, many friends do not know how to use the automatic feeding cement mixer after purchasing it. Today, we will introduce the precautions for the automatic feeding cement mixer, hoping to help you.
1、在施工现场卸料完毕后,应立即用搅拌车随带的软管冲洗进料斗、出料斗、卸料溜槽等处,粘附在车身各处的污泥及混凝土。在返回搅拌站的途中,应向搅拌筒内注150---200L水以清洗筒壁及叶片粘结的混凝土残渣。
1. After unloading at the construction site, immediately flush the feed hopper, discharge hopper, discharge chute, etc. with the hose attached to the mixer truck to remove the sludge and concrete adhering to the vehicle body. On the way back to the mixing plant, 150-200L water shall be injected into the mixing drum to clean the concrete residue bonded by the drum wall and blades.
2、每天工作结束后,司机应负责向搅拌筒内注入清水并高速(14—18转/分)旋转5—10分钟,然后将水排去,以保证筒内清洁。用高压水清洗搅拌筒各个部分时,应注意避开仪表及操纵杆等部位。压力水喷嘴与车身油漆表面间的距离不得小于40厘米。
2. At the end of each day's work, the driver shall be responsible for injecting clean water into the mixing drum and rotating it for 5-10 minutes at a high speed (14-18 rpm), and then draining the water to ensure that the drum is clean. When cleaning each part of the mixing drum with high-pressure water, attention should be paid to avoiding instruments, control rods and other parts. The distance between the pressure water nozzle and the body paint surface shall not be less than 40 cm.
3、搅拌筒内外积污及残存的混凝土渣块时,以及在机修人员进入筒内进行检修和焊补作业时,需先关闭汽车发动机,使搅拌筒完全停止转动。在机修人员进入筒内工作期间,须保证拌筒内通风良好,空气新鲜,无可然气体及有害灰尘,氧气供应充足。在筒内使用电动工具操作时,操作人员须有良好的绝缘保护。
3. When removing the dirt and residual concrete slag inside and outside the mixing drum, and when the machine maintenance personnel enter the drum for maintenance and repair welding, it is necessary to first shut down the car engine to completely stop the mixing drum. During the period when the machine maintenance personnel enter the mixing drum to work, they must ensure that the mixing drum is well ventilated, the air is fresh, there is no natural gas and harmful dust, and the oxygen supply is sufficient. When using electric tools in the cylinder, operators must have good insulation protection.
4、工作时,不得将手伸入旋转的搅拌筒内,严禁将手伸入主卸料溜槽和加长卸料溜槽的连接部位自动,工作人员如何规范操作自动上料搅拌车以免发生事故。
4. When working, do not put your hand into the rotating mixing drum, and do not put your hand into the connection part of the main discharge chute and the extended discharge chute for automatic operation. How can the staff operate the automatic feeding mixer to prevent accidents.
The above is a detailed introduction to the automatic mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.shanqijituan.cn/