自动搅拌一体机的搅拌筒是其中的重要组成部分。那么失败的原因是什么呢?我该如何?接下来,让我们谈谈。
The mixing drum of automatic mixing machine is an important part of it. So what is the reason for the failure? How can I solve it? Next, let's talk.
通常,搅拌车的搅拌筒不旋转有两个原因:(1)液压系统或发动机故障,以及(2)电动机故障。处理方法如下。
Generally, the mixing drum of the mixer truck does not rotate for two reasons: (1) hydraulic system or engine failure, and (2) motor failure. The treatment method is as follows.
1.液压系统或发动机故障的处理:
1. Troubleshooting of hydraulic system or engine:
(1)打开用于运输混凝土的搅拌机搅拌筒的检查孔盖,松开电机高压软管的管接头,旋转搅拌筒,将搅拌筒的检查孔斜向下方旋转,然后检查混凝土搅拌筒。从孔中排出。
(1) Open the inspection hole cover of the mixing drum of the mixer used to transport concrete, loosen the pipe joint of the high-pressure hose of the motor, rotate the mixing drum, rotate the inspection hole of the mixing drum obliquely downward, and then check the concrete mixing drum. Drain from the hole.
(2)从电动机上拆下故障车的高压软管,连接高压软管以供紧急使用,将另一端连接到救护车的油泵上,并将紧急回油管的一端连接到故障车的电机排水口。去做。回油管的另一端连接到救护车的油泵回油口,并且救护车控制故障车辆的搅拌筒的旋转以排出混凝土。
(2) Remove the high-pressure hose of the failed vehicle from the motor, connect the high-pressure hose for emergency use, connect the other end to the oil pump of the ambulance, and connect one end of the emergency oil return pipe to the motor drain of the failed vehicle. Do it. The other end of the oil return pipe is connected to the oil pump return port of the ambulance, and the ambulance controls the rotation of the mixing drum of the failed vehicle to discharge the concrete.
现场测试表明,制造工厂中的所有工具完成后,采用二种方法大约需要一个小时,这在施工现场可能很耗时,因此一种方法是排出混凝土。建议使用。
Field tests show that after all the tools in the manufacturing plant are completed, it takes about an hour to adopt the two methods, which may be time-consuming at the construction site, so one method is to discharge the concrete. Recommended.
2.电机故障:易于处理。卸载救援车辆的电动机,将其连接到发生故障的车辆,连接每个油管,启动救援车辆并排净搅拌桶中的混凝土。
2. Motor fault: easy to handle. Unload the motor of the rescue vehicle, connect it to the failed vehicle, connect each oil pipe, start the rescue vehicle and drain the concrete in the mixing drum.
换句话说,当在运输混凝土的搅拌车中发生故障时,必须及早发现原因并采取诸如将混凝土倒入搅拌筒中的措施以故障。
In other words, when a failure occurs in the mixer truck transporting concrete, the cause must be found early and measures such as pouring concrete into the mixing drum must be taken to eliminate the failure.