混凝土自动上料搅拌一体车的注意事项_公司新闻_新闻资讯_自动搅拌一体车_自动搅拌一体机

站内搜索

新闻资讯

公司新闻行业动态

热点

自动上料平口搅拌机多种方量可供选择

2022-12-23

混凝土自动上料搅拌车的功能有哪些？

2022-12-19

混凝土自动拌料车移动式可自行走户外施工

2022-12-16

自上料搅拌车企业这么多，买车的时候应该看哪方面？

2022-12-12

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

混凝土自动上料搅拌一体车的注意事项

所属分类：公司新闻发布时间：2021-12-30 来源：http://www.shanqijituan.cn/ 浏览量：0

混凝土自动上料搅拌一体车的注意事项

Precautions for automatic concrete loading mixer

在使用混凝土自动上料搅拌一体车之前，您需要了解注意事项。

Before using the automatic concrete loading mixer, you first need to understand the precautions.

1.液压系统的压力需要符合手册的要求，并且不得随意调节。液压油的质量和数量需要符合原始要求。

1. The pressure of the hydraulic system shall meet the requirements of the manual and shall not be adjusted at will. The quality and quantity of hydraulic oil shall meet the original requirements.

2.在装载混凝土自动上料搅拌一体车之前，需要先排干搅拌桶中残留的水和碎屑。在运输过程中连续旋转以防止混凝土分离。在混凝土搅拌车到达施工现场并弹出之前，混凝土自动上料搅拌一体车需要以14-18转的全速旋转1-2分钟，然后以相反的方向弹出。向后移动之前，请停止旋转搅拌桶，并且不要旋转搅拌桶。

2. Before loading the automatic concrete loading mixer, it is necessary to drain the residual water and debris in the mixing bucket. Continuous rotation during transportation to prevent concrete separation. Before the concrete mixer arrives at the construction site and pops up, the automatic concrete loading mixer needs to rotate at full speed of 14-18 revolutions for 1-2 minutes, and then pop up in the opposite direction. Before moving backward, stop rotating the drum and do not rotate the drum.

3.环境温度超过+25摄氏度。装载，运输和卸载时间不应超过60分钟，环境温度应低于+25摄氏度。以上时间不得超过90分钟。

3. The ambient temperature exceeds + 25 ℃. The loading, transportation and unloading time shall not exceed 60 minutes, and the ambient temperature shall be lower than + 25 ℃. The above time shall not exceed 90 minutes.

4.工作时请勿触摸旋转的搅拌桶。为防止事故发生，严禁进入主卸料槽和延伸卸料槽的接头。

4. Do not touch the rotating mixing drum during operation. In order to prevent accidents, it is strictly prohibited to enter the joints of the main discharge chute and the extended discharge chute.

5.日常工作后，驾驶员将清洁水注入搅拌桶，以高速（14-18 rpm）旋转5-10分钟，然后将水排干以确保需要清洁水箱。用高压水清洁搅拌桶的各个部分时，请注意不要使用乐器或操纵杆。压力水喷嘴与车身油漆表面之间的距离需要少为40厘米。

5. After daily work, the driver shall inject clean water into the mixing bucket, rotate it at high speed (14-18 RPM) for 5-10 minutes, and then drain the water to ensure that the water tank needs to be cleaned. When cleaning all parts of the mixing bucket with high-pressure water, please be careful not to use musical instruments or control levers. The distance between the pressure water nozzle and the paint surface of the vehicle body needs to be at least 40 cm.

本文由自动上料搅拌一体车为您提供，我们的网站是：http://www.shanqijituan.cn/我们将以全心全意的热情为您提供服务，欢迎您的访问！

This article is provided by the automatic feeding and mixing integrated vehicle. Our website is: http://www.shanqijituan.cn/.We will serve you with wholehearted enthusiasm. Welcome to visit!

上一页：自动搅拌一体车好不好，看这几方面就够了下一页：全自动上料搅拌机有哪些优势特点

热门产品 / HOT PRODUCT