由于现在农村建设发展快,人们对小型混凝土自动上料搅拌车的需求不断增加。大型混凝土自动上料搅拌车造价高、维修费用高,因此在建设中小型混凝土自动上料搅拌车成逐步增加趋势。今天小编给大家讲解的是小型混凝土自动上料搅拌车的使用维护保养要点,下面一起来看看吧!
Due to the rapid development of rural construction, people's demand for small automatic concrete mixer is increasing. The cost of large automatic concrete loading mixers is high, and the maintenance cost is high. Therefore, the construction of small and medium-sized automatic concrete loading mixers is gradually increasing. Today, Xiaobian explained the key points of the use and maintenance of small concrete automatic feeding mixer. Let's take a look!
1.液压驱动系统:液压系统是搅拌车的核心系统。为保证搅拌车能正常工作,搅拌罐能运转正常,在每次车辆发动前检查油路散热器和减速机的液压油位,保证油位指示在视窗范围内。同时要保证其清洁性,以免尘粒和水分等污染系统液压油,造成系统不能正常工作或损坏。
1. Hydraulic drive system: the hydraulic system is the core system of the mixer truck. To ensure that the mixer truck can work normally and the mixing tank can operate normally, check the hydraulic oil level of the oil radiator and reducer before starting the vehicle each time to ensure that the oil level indication is within the window range. At the same time, ensure its cleanliness to avoid contamination of the hydraulic oil of the system by dust particles and moisture, which may cause the system to fail to work normally or be damaged.
2.供水系统:气压供水系统加水量一般在水箱的四分之三处为宜;车辆在行驶时水路系统中各个阀门均应处于关闭状态,以免影响车辆的制动性能,或烧结摩擦片,从而影响车辆的制动性能。禁止随意焊接和改动水箱,避免重物撞击;经常检查阀体是否堵塞或是否有工作异常;在有结冰可能的环境中使用时,供水系统排空存水,防止管路冻裂;经常检查系统的密封性,拆卸修理后,关键部位要涂螺纹密封胶。
2. Water supply system: the water volume of the pneumatic water supply system is generally three quarters of the water tank; All valves in the waterway system shall be closed when the vehicle is running, so as not to affect the braking performance of the vehicle, or sinter friction plates, thereby affecting the braking performance of the vehicle. It is prohibited to weld and change the water tank at will to avoid heavy object impact; Check the valve body frequently for blockage or abnormal operation; When it is used in an environment with the possibility of icing, the water supply system shall drain the stored water to prevent the pipeline from freezing; Check the tightness of the system frequently. After disassembly and repair, apply thread sealant to key parts.
3.搅拌筒:初次使用50h要及时检查罐体及其他部位螺栓是否有松动,每天行车前要检查托轮与滚道的润滑,每个月打开一次托轮护罩,清理内部的油污并添加润滑油脂。
3. Mixing drum: after 50 hours of initial use, timely check whether the bolts on the tank body and other parts are loose. Before driving every day, check the lubrication of the supporting wheel and raceway, open the supporting wheel shield once a month, clean the internal oil stain and add lubricating grease.
以上就是为大家介绍的有关自动搅拌一体车的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.shanqijituan.cn/
The above is a detailed introduction to the automatic mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.shanqijituan.cn/