通常,诸如自动搅拌一体机之类的车辆设备在表面上具有一层油漆,以更好地保护车辆的外部和外部。在正常操作期间,油漆很容易损坏,因此,这是保护搅拌机油漆不受损坏的方法。
In general, vehicle equipment such as an all-in-one mixer has a layer of paint on the surface to better protect the exterior and exterior of the vehicle. During normal operation, the paint is easily damaged, so this is a way to protect the paint from damage.
1.如果不清洁搅拌一体机的涂漆表面,金属漆将开裂非常小,并会继续渗透到漆层中,直到它渗透到整个漆层中为止。 ..如果裂纹中包含蜡,则在身体上会出现条纹。定期打蜡可以逐渐减少裂纹。
1. If the painting surface of the mixer is not cleaned, the metal paint will crack very little and continue to penetrate into the paint layer until it penetrates into the whole paint layer. If the crack contains wax, streaks will appear on the body. Regular waxing can gradually reduce cracks.
2.当自动搅拌车暴露在太阳的紫外线下时,它会不断蒸发并保护空气中的油。随着时间的流逝,油漆油会过度分散。
2. When the automatic mixer is exposed to the ultraviolet rays of the sun, it will continuously evaporate and protect the oil in the air. Over time, the paint oil will be over dispersed.
涂漆表面的亮度和深度将大大降低,涂漆表面将逐渐变白,将形成氧化层,并缩短涂层寿命。如果搅拌车的涂漆表面被严重氧化,则可以通过研磨和抛光进行处理。
The brightness and depth of the painted surface will be greatly reduced, the painted surface will gradually turn white, the oxide layer will be formed, and the coating life will be shortened. If the painted surface of the mixer is seriously oxidized, it can be treated by grinding and polishing.
3.自动搅拌一体机的表面磨损。它可能是由昆虫,禽粪,树液,柏油或沥青引起的。一些小的蚀刻可以通过研磨和抛光。
3. The surface of the automatic mixer is worn. It may be caused by insects, poultry manure, tree sap, tar or asphalt. Some small etchings can be solved by grinding and polishing.
除上述方法外,在驾驶车辆时应更加注意避免碰撞和摩擦,以有效地防止油漆溅到车辆上。否则,会发生其他损坏。
In addition to the above methods, more attention should be paid to avoid collision and friction when driving the vehicle, so as to effectively prevent the paint from splashing on the vehicle. Otherwise, other damage may occur.