1、自动搅拌一体车在运转过程中不得检修和润滑。
1. The automatic mixer shall not be overhauled and lubricated during operation.
2、定期向各黄油嘴加注黄油,轴端密封处每4小时注润滑油一次,每周排污一次。
2. Regularly add grease to each grease fitting, inject lubricating oil at the shaft end seal every 4 hours and blow down once a week.
3、自动搅拌一体车在使用后酌情对各润滑点加注必要的润滑油(滚轮轴、滚轮、钢丝绳等活动部位)。
3. After use, the automatic mixer truck shall fill necessary lubricating oil (roller shaft, roller, steel wire rope and other moving parts) at each lubricating point as appropriate.
4、自动搅拌一体车减速箱的齿轮和轴承是利用齿轮回转将机油飞溅到箱体内壁,流入轴承中去进行润滑的。减速箱的油面应保持在油标尺两刻线之间为宜。油面过高或过低会导致各部温度升高或润滑不良,增加功率损耗和造成机器工作不良。
4. The gear and bearing of the reduction gearbox of the automatic mixing integrated vehicle splash the oil to the inner wall of the box by using the gear rotation and flow into the bearing for lubrication. The oil level of the reduction gearbox should be kept between the two scribed lines of the oil scale. Too high or too low oil level will lead to temperature rise or poor lubrication of all parts, increase power loss and cause poor operation of the machine.
5、自动搅拌一体车选用的润滑油应具有一定购粘度和粘温特性,凝点低,防氧化安定性良好,没机械杂质和水分,不合腐蚀和磨损物质等。其质量指标应符合标准规定。
5. The lubricating oil selected for the automatic mixer shall have certain viscosity and viscosity temperature characteristics, low freezing point, good anti-oxidation stability, no mechanical impurities and moisture, non corrosive and wear substances, etc. Its quality index shall comply with the provisions of national standards.