如果要维护自动搅拌一体机电机,电机将继续运行。日常维护非常重要:电机工作时,请勿过于颠簸,以免损坏电机或缩短使用寿命。花了更长的时间?还要检查外观,风扇是否工作正常,是否有异常振动,联轴器是否可靠,底座是否固定,轴承是否正常工作(听声音),温度是否正常(红外线))温度计,以及电流是否正常。型号电流表),除了绕线电机外,还要检查碳刷和滑环。如果自动搅拌一体机在一个方面是异常的,则需要快速执行电动机维护和处理。否则,情况严重后,将不予处理。
If the motor of the automatic mixer is to be maintained, the motor will continue to run. Daily maintenance is very important: when the motor is working, do not bump too much, so as not to damage the motor or shorten its service life. Took longer? Also check the appearance, whether the fan works normally, whether there is abnormal vibration, whether the coupling is reliable, whether the base is fixed, whether the bearing works normally (listen to the sound), whether the temperature is normal (infrared) thermometer, and whether the current is normal. In addition to the winding motor, check the carbon brush and slip ring. If the automatic mixer is abnormal in one aspect, it needs to carry out motor maintenance and treatment quickly. Otherwise, if the situation is serious, it will not be dealt with.
自动搅拌一体机操作员技能:搅拌一体机对操作和维护人员的要求较低。该设备结构复杂,自动化程度高,对操作员和维护人员的要求很高。操作员应始终对自动搅拌一体机设备的组件间隙进行适当调整。
Automatic mixing machine operator skills: mixing machine on the operation and maintenance of low requirements. The equipment has complex structure, high degree of automation and high requirements for operators and maintenance personnel. The operator should always properly adjust the component clearance of the automatic mixer equipment.
如遇恶劣天气,自动搅拌一体机请及时停止工作。夜间工作应有足够的照明条件;如果在整个操作过程中出现异常和模糊,应立即暂停工作并报告给项目部员和机械经理。
In case of bad weather, please stop working in time. Sufficient lighting conditions shall be provided for night work; In case of any abnormality or ambiguity during the whole operation, the work shall be suspended immediately and reported to the safety officer and mechanical manager of the project department.
自动搅拌一体机的提升位置应由人员指定。指挥官应佩戴一个独特的标志并站在位置,以便驾驶员能够看到指令信号。发送的命令信号清晰准确。在负荷下降之前,指挥官确认着陆区域的,起重机应注意着陆信号。司机应该按照指挥官的信号工作。当信号不清楚或错误时,驾驶员可以拒绝执行。
The lifting position of the automatic mixer shall be designated by personnel. The commander should wear a unique sign and stand in a safe position so that the driver can see the command signal. The command signal sent is clear and accurate. Before the load drops, the commander shall confirm the safety of the landing area, and the crane shall pay attention to the landing signal. The driver should follow the commander's signal. When the signal is not clear or wrong, the driver can refuse to execute.