自动上料搅拌车搅拌轴不转了是怎么回事？_价格资讯_自动搅拌一体车_自动搅拌一体机

站内搜索

价格资讯

热点

自动上料平口搅拌机多种方量可供选择

2022-12-23

混凝土自动上料搅拌车的功能有哪些？

2022-12-19

混凝土自动拌料车移动式可自行走户外施工

2022-12-16

自上料搅拌车企业这么多，买车的时候应该看哪方面？

2022-12-12

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

自动上料搅拌车搅拌轴不转了是怎么回事？

所属分类：价格资讯发布时间：2022-05-26 来源：http://www.shanqijituan.cn/ 浏览量：0

自动上料搅拌车集上料、搅拌为一体，节省人力物力，被广泛应用。自动上料搅拌车如有物料那么不能停止搅拌，防止物料凝固。有不少客户遇到过自动上料搅拌车搅拌轴不转的问题，下面我们来分析它是怎么回事？

Automatic loading mixer integrates loading and mixing, saves manpower and material resources, and is widely used. If there are materials in the automatic feeding mixer, the mixing cannot be stopped to prevent the materials from solidification. Many customers have encountered the problem that the mixing shaft of automatic feeding mixer truck does not rotate. Let's analyze what's going on next?

1.自动上料搅拌车电机传送带松动，使得搅拌轴不能转动。这时应停机机器，调节传送带的松紧度。

1. The motor conveyor belt of the automatic feeding mixer truck is loose, so that the mixing shaft cannot rotate. At this time, stop the machine and adjust the tightness of the conveyor belt.

2.如果混泥土自动上料搅拌车的电机传动皮带松动，则混泥土自动上料搅拌车的搅拌轴将缓慢旋转或停止，电机传动皮带将松动，并且传动装置不足。当混泥土自动上料搅拌车的搅拌轴超过正常工作负荷时，搅拌轴缓慢旋转。如果负载太高，搅拌轴将停止或弯曲。如果混泥土自动上料搅拌车过载，则混合轴将停止。所需要的是调节供给，去除多余的材料，并减少混合轴上的旋转负载。

2. If the motor drive belt of the automatic concrete feeding mixer is loose, the mixing shaft of the automatic concrete feeding mixer will rotate or stop slowly, the motor drive belt will be loose and the transmission device is insufficient. When the mixing shaft of the automatic concrete loading mixer exceeds the normal working load, the mixing shaft rotates slowly. If the load is too high, the mixing shaft will stop or bend. If the automatic concrete loading mixer truck is overloaded, the mixing shaft will stop. What is needed is to adjust the supply, remove excess material and reduce the rotational load on the mixing shaft.

3.搅拌叶片或侧叶片与气缸内壁之间有异物。如果物料粘附在侧叶片和内壁上，则在搅拌器轴停止之前总会有尖锐而强烈的摩擦声。在这种情况下，须立即停止检查，手动清理异物，然后重新调整混泥土自动上料搅拌车。如有必要，冲洗一个或多个搅拌桨和水箱内壁之间的间隙。

3. There are foreign matters between the mixing blade or side blade and the inner wall of the cylinder. If the material adheres to the side blades and inner walls, there will always be a sharp and strong friction sound before the agitator shaft stops. In this case, the inspection shall be stopped immediately, the foreign matters shall be cleaned manually, and then the automatic concrete loading mixer shall be readjusted. If necessary, flush the gap between one or more agitators and the inner wall of the water tank.

本文的精彩内容由多功能搅拌车提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.sqjituan.com我们有专门的客服为您解答问

The wonderful content of this article is provided by the multi-functional mixer. There are many wonderful contents on this website. You can click to enter more contents: http://www.sqjituan.com We have special customer service to answer your questions

上一页：下一页：混凝土搅拌车气路系统的保养

热门产品 / HOT PRODUCT