使用
自动搅拌一体机遇到无法启动的问题要怎样处理?
How to deal with the problem that the automatic mixer cannot be started?
1.确定堵塞的原因。为了这种自动搅拌一体机不会造成此类障碍的诊断,应测试电池。您需要确定电池电量是否不足。
1. Determine the cause of the blockage. In order to solve the diagnosis that this kind of automatic mixing machine will not cause such obstacles, the battery should be tested first. You need to determine if the battery is low.
2.检测并启动系统。
2. Detect and start the system.
3.在检测焚烧同步带时会发生打滑现象,并且不会产生火花。
3. There will be slippage and no spark when detecting the burning synchronous belt.
4.检查火花的质量。可以取下焚化线圈,并可以使用电火花探测器检测火花是否正常。
4. Check the quality of spark. The incineration coil can be removed and the spark detector can be used to detect whether the spark is normal.
5.测试燃油系统。其燃油系统的诊断可分为两部分:燃油供给系统的诊断和喷射器回路的诊断。燃料供应系统可以通过测量燃料的流量和压力进行检测。测量燃油流量的一种好方法是加载燃油供应管路以测试管路。
5. Test the fuel system. The diagnosis of fuel system can be divided into two parts: diagnosis of fuel supply system and diagnosis of injector circuit. The fuel supply system can be detected by measuring the flow and pressure of the fuel. A good way to measure fuel flow is to load the fuel supply line to test the line.
6.防盗系统的检测:其防盗系统也发生在一些经常被忽视的供油系统中。一些混合器制造商在防盗系统的数据流中包含参数标识。在许多型号上,防盗系统的模块未经适当的初始化就被更换。
6. Detection of anti-theft system: the anti-theft system also occurs in some oil supply systems which are often ignored. Some mixer manufacturers include parameter identification in the data stream of the anti-theft system. On many models, the anti-theft system module is replaced without proper initialization.
自动搅拌一体机无法启动情况处理就是这些,希望对你有帮助。
Automatic mixing machine can not start up, this is how to deal with the situation, hope to help you.