搅拌斗装载机不能行走的情况想必大家也有遇到过,不能正常行走,肯定就会影响正常的工作,但是,大家也不要惊慌,要找出原因,排查故障。
We must have encountered the situation that the mixing bucket loader can't walk. If it can't walk normally, it will certainly affect the normal work. However, don't panic, find out the cause and troubleshoot.
1.检查变速箱的油量限位阀、变速压力表,如果发现缺少变速变距油应该添加新油,但不能添加太多,否则会导致变速箱出现发热的情况,通常情况下添加到限位阀流出油即可。
1. Check the oil quantity limit valve and transmission pressure gauge of the transmission. If it is found that there is a lack of transmission variable distance oil, add new oil, but do not add too much, otherwise the transmission will be heated. Usually, add the oil flowing out of the limit valve.
2.检查动臂能否起落、有没有转向,若动臂可起、可落,还可以完成转向动作,但是机械本身无法实现行走的过程。这主要是因为变速泵的损坏缺油水而导致的。
2. Check whether the boom can rise and fall and whether there is steering. If the boom can rise and fall, it can also complete the steering action, but the machine itself cannot realize the process of walking. This is mainly caused by the damage and lack of oil and water of the variable speed pump.
3.若动臂不能进行升降起落,也无法实现转向动作,且本身也不可实现行走。这种情况大多数是由于搅拌斗变速器的钢板链接被螺栓剪断、弹性板破裂导致的。将柴油机、变速箱一起吊出,拆除变矩器柴油机的连接位置,并检查出损坏位置,更换并修好零件即可。
3. If the boom cannot rise and fall, it cannot realize steering action, and it cannot realize walking itself. This situation is mostly caused by the steel plate link of the mixing bucket transmission being cut off by bolts and the elastic plate being broken. Lift out the diesel engine and gearbox together, remove the connection position of the torque converter diesel engine, check the damaged position, and replace and repair the parts.
搅拌车厂家提醒大家,无论任何设备遇到故障,都要认真对待,找到问题的根源,从而找到相应的方法。
The mixer truck manufacturer reminds everyone that no matter any equipment fails, they should take it seriously and find the root of the problem, so as to find the corresponding solutions.
The above is the detailed introduction of the automatic mixing machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.shanqijituan.cn/