在我们的生活中,混凝土搅拌车是用于运输混凝土的特殊车辆,通常在该车辆后方装有一个大罐来搅拌混凝土。但是,由于需要长期清洁车辆内部的混凝土,因此下面介绍具体的清洁方法。
In our life, concrete mixer is a special vehicle used to transport concrete. Usually, a large tank is installed at the rear of the vehicle to mix concrete. However, since the concrete inside the vehicle needs to be cleaned for a long time, the specific cleaning methods are described below.
1.准备应急驱动软管,关闭搅拌车,并卸下液压马达的高压油管接头。
1. Prepare the emergency drive hose, close the mixer truck, and remove the high-pressure oil pipe connector of the hydraulic motor.
2.拆下高压油管,并用紧急驱动软管将其连接到故障汽车的相应接头。
2. Remove the high-pressure oil pipe and connect it to the corresponding connector of the faulty vehicle with the emergency drive hose.
3.对于发动机搅拌车,将控制手柄转到卸料位置,以去除搅拌车内的混凝土。
3. For the engine mixer, turn the control handle to the unloading position to remove the concrete in the mixer.
4.应急驱动器完成后,卸下驱动器软管,将车辆恢复到原始状态。
4. After the emergency drive is completed, remove the drive hose and restore the vehicle to its original state.
由于您中有些人可能已经知道如何清洁混凝土搅拌车内的混凝土,因此更要了解这些知识,以防止在使用过程中出现故障对设备正常运行的影响,我希望您能够做到这一点。
Since some of you may already know how to clean the concrete in the concrete mixer truck, you should know more about this knowledge to prevent the impact of failure on the normal operation of the equipment during use. I hope you can do this.
The above is a detailed introduction to the automatic mixer. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.shanqijituan.cn/